USER MANUAL
IP cameras for video surveillance
Page:
22
Page:
22
Last updated: May 2009
DSE srl - ITALY - WWW.DSE.EU
PROGRAM SELECTION
- Choose which
PROGRAM SELECTION
- Choose which
camera functionality you want to enable only in certain time slots.
START TIME / END TIME
- For each day of
START TIME / END TIME
- For each day of
week you can set the time zone where the event will be enabled. By default the option is
always set
0.00 / 24.00 which means: always enabled.
USE THE SAME PROGRAMMING DAILY
- With this option the programmed
USE THE SAME PROGRAMMING DAILY
- With this option the programmed
schedule of Monday 'will be used for all 7 days of the week.
ALARM INPUTS
Several functions of the cameras (eg. Sending e-mail, FTP, outputs activation, etc.) can be
automatically activated on the basis of the input of external alarm that some cameras have
been supplied.
In previous screens whenever you chose the ALARM INPUT button was accessed in this
section to set the input operation. This window is accessed directly.
ASSOCIATE CONDITIONS
- Choose whether you want the alarm
ASSOCIATE CONDITIONS
- Choose whether you want the alarm
It will be activated with input state HIGH or LOW. The alarm input is activated by applying a
5 or 12VDC voltage according to the diagram shown in INSTALLATION section. If this
option is set to HIGH it means that the input will be considered in alarm to miss the applied
voltage. Minimum 10 seconds must elapse between two consecutive alarms.
IF the option is set to LOW the alarm will be activated at the moment when
voltage is applied. Minimum 10 seconds must elapse between two consecutive alarms.
MOVE CAMERA
- In camera
MOVE CAMERA
- In camera
PTZ can recall a Preset trigger input.
MOTION DETECTION
All cameras include the motion detection function in order to activate the alarm actions as a
result of a movement in the image. Following an intrusion is possible to send the frame via
email or FTP and activate the alarm output (if available)
Each camera allows set up to 3 detection areas, each with programmable sensitivity.
LOCATION
- enable at least one of the three
LOCATION
- enable at least one of the three
detection masks available and size the highlighted area
image.
There
detection
movement will only take place within the highlighted area.
THRESHOLD (THRESHOLD) / SENSITIVITY '
-
THRESHOLD (THRESHOLD) / SENSITIVITY '
-
By moving the sliders to the right it makes the detection more sensitive to the slightest
movement. By moving the sliders to the left will react detection only in case of more
substantial movements.
EVENTS SYSTEM
In this folder you can view the history of connections and events are recorded in the
camera's memory
REMOTE EVENTS
- This option
REMOTE EVENTS
- This option
You can make sure that the camera also send events to an external PC on which a server
program such as log 3CDaemon installed.
