DSE DSEGenset DSE8004, Руководство оператора

Страница: 56 / 80

Controls and Indications
56
5.3.7 ALARMS
There are two screens on the alarms page, one displaying the current alarms and another displaying
the event log.
The alarms displays any current warnings, electrical trip and shutdown alarms and any CAN engine
DTCs that are present.
Press the Instrumentation Scroll to change between current alarms and the event log page.
The event log display a list of events. The number of events displayed depends on the space
available with the chosen font. The event log page will display the event index, event type, date,
time and number of hours run for each event. Electronic engine diagnostic trouble codes are
displayed as single events in the event log.
Alarm Level Colour/Title Graphic
Warning
Electrical Trip
Shutdown
ECU Code
Engine alarms are not applicable when connected
to DSE8x60 controller and only where connected
to suitably configured CAN (ECU) engine.
Engine alarms are not applicable when connected
to DSE8x60 controller and only where connected
to suitably configured CAN (ECU) engine.