DSE DSEGenset DSE8004, Руководство оператора

Страница: 10 / 80

Specification
10
3.7 COMMUNICATION PORTS
NOTE: For further details of module configuration, refer to DSE Publication: 057-128
DSE8005 SCADA Suite Software Manual.
NOTE: All communication ports can be used at the same time.
Port Specification
USB Slave Port
Type B USB 2.0
For connection to PC running DSE Configuration Suite
Max distance 6 m (20 feet)
USB Host Port
Type A USB 2.0
Capability to add a maximum of 16 GB USB storage device to
module upload configuration.
Serial Communication
RS232 and RS485 are both fitted and provide independent
operation
RS232 Serial Port
Non – isolated
Max Baud rate 115 kbaud subject to configuration
TX, RX, RTS, CTS, DSR, DTR, DCD
Male 9 way D type connector
Max distance 15 m (50 feet)
RS485 Serial Port
Isolated
Data connection 2 wire + common
Half Duplex
Data direction control for Transmit (by s/w protocol)
Max Baud Rate 115 kbaud subject to configuration
External termination required (120
Ω
)
Max common mode offset 70 V (on board protection transorb)
Max distance 1.2 km (¾ mile)
RS485/CAN Port
RS485
Isolated
Data connection 2 wire + common
Half Duplex
Data direction control for Transmit (by s/w protocol)
Max Baud Rate 115 kbaud subject to configuration
External termination required (120
Ω
)
Max common mode offset 70 V (on board protection transorb)
Max distance 1.2 km (¾ mile)
CAN Port
Standard implementation of ‘Slow mode’, up to 250K bits/s
Non-Isolated.
Internal Termination provided (120
Ω
)
Max distance 40m (133 feet)
Ethernet Port
RJ45 Ethernet connection for TCP/IP
Auto detecting 10/100 Mbit Ethernet port
Auto MDIX to remove need for crossover cables
Max distance 100 m (328 feet) between routers