USER MANUAL
DIGITAL VIDEO DR-N4 / 8/16
Page: -
11 -
Page: -
11 -
Page: -
11 -
DSE srl - ITALY - WWW.DSE.EU
superior protection by unscrewing the lateral fixing screws.
2. Attach the hard disk unit in its seat by means of the screws
2. Attach the hard disk unit in its seat by means of the screws
fixing.
3. Connect the red SATA cable for data and power cable between hard drive and motherboard.
4. Close the device with the lid by screwing the screws.
4. Close the device with the lid by screwing the screws.
The DR-N16 VCR also features a front drawer in which you can, if necessary, install a second hard drive
removed from the front.
CAUTION:
Before you start recording you must perform physical formatting of the hard drive
CAUTION:
Before you start recording you must perform physical formatting of the hard drive
according to the instructions below in section 6.
•
feeder Connection
Connect the power supply 220VAC / 12VDC supplied to the rear connector 12VDC
3.2 Other connesioni
•
audio Inputs
Camera equipped with separate microphone or microphones can be connected to the VCR through the
AUDIO IN inputs. The inputs support standard analog audio 2Vp-p 600 Ohm. Use microphones active type.
•
audio Outputs
You can connect speakers, headphones or other external audio equipment such as a TV audio inputs and
monitor. This way you can hear the sound from the microphone inputs and during playback.
•
LAN
The connection to the VCR network takes place via the outlet of the rear RJ45 network. Before using the
LAN connection set parameters
