USER MANUAL
DIGITAL VIDEO DR-N4 / 8/16
Page: -
33 -
Page: -
33 -
Page: -
33 -
DSE srl - ITALY - WWW.DSE.EU
The system can manage an administrator password and user password 6.
The default password is admin: 888888 and User: 666666
Later he explains how to customize the user name and assign a level of access to the DVR functions.
FACTORY RESET PASSWORD
If after setting the access password you were to forget them there is a Hardware reset procedure to restore the
factory password.
DR-DR-N4 and N8:
Open the DVR and locate on the motherboard the JP17 jumper next to the SATA connector.
DR-DR-N4 and N8:
Open the DVR and locate on the motherboard the JP17 jumper next to the SATA connector.
Bridging the jumper for a few seconds until the buzzer will sound a confirmation beep
DR-N16:
Open the DVR and locate on the motherboard the JP15 jumper near the control panel. Bridging the
DR-N16:
Open the DVR and locate on the motherboard the JP15 jumper near the control panel. Bridging the
jumper for a few seconds until the buzzer will sound a confirmation beep
DVR ID NUMBER
• Reserved for future implementations. It allows you to establish an identifier for the DVR.
DVR ID NUMBER
• Reserved for future implementations. It allows you to establish an identifier for the DVR.
DVR ID NUMBER
• Reserved for future implementations. It allows you to establish an identifier for the DVR.
G PREVIEW (CRUISE)
• to set the image display mode when you start the SEQ polling. The first item allows you to
G PREVIEW (CRUISE)
• to set the image display mode when you start the SEQ polling. The first item allows you to
G PREVIEW (CRUISE)
• to set the image display mode when you start the SEQ polling. The first item allows you to
set the dwell time on the screen of each screen,
the second
how many cameras to show at all (1/4 screen), and the third which cameras to scan.
SPECIAL MENU
• enables automatic logout from the DVR in the absence of operations after 30 seconds, 1 minute
SPECIAL MENU
• enables automatic logout from the DVR in the absence of operations after 30 seconds, 1 minute
SPECIAL MENU
• enables automatic logout from the DVR in the absence of operations after 30 seconds, 1 minute
or 5 minutes. This option is to be enabled if you want to allow viewing of the cameras only to authorized
personnel.
SETTING LOCK CHANNEL
• The administrator can make sure that the normal user codes can not see the images
SETTING LOCK CHANNEL
• The administrator can make sure that the normal user codes can not see the images
SETTING LOCK CHANNEL
• The administrator can make sure that the normal user codes can not see the images
of one or more cameras
SPOT CONFIGURATION
• This feature is only available on the DR-N16 model is used to establish the display
SPOT CONFIGURATION
• This feature is only available on the DR-N16 model is used to establish the display
SPOT CONFIGURATION
• This feature is only available on the DR-N16 model is used to establish the display
visible in sequence from the
