USER MANUAL
DIGITAL VIDEO DR-N4 / 8/16
Page: -
8 -
Page: -
8 -
Page: -
8 -
DSE srl - ITALY - WWW.DSE.EU
PORT RS485 - The serial port is used to send commands to motorized speed dome cameras (
RS485).
PORT RS485 - The serial port is used to send commands to motorized speed dome cameras (
RS485).
PORT RS485 - The serial port is used to send commands to motorized speed dome cameras (
RS485).
10 ON / OFF
switching on and off switch.
11 Power connector
Connect the power supply 12VDC.
12 Cooling Fan
Fan for the cooling of the hard disk.
13 HDMI Video output (DR-N16 only)
The only DR-N16 model includes another type of HDMI video output to connect a TV-like monitor.
2.3 Remote Control
The remote is a standard accessory with the DVR to facilitate the user. You can perform all the functions with the
remote control at a distance instead of going to select the front panel. The effective distance is about 10 meters
without any obstacle.
The DR-N keyboard also has only the essential buttons for operation, while several additional functions are only
available using the mouse or remote control.
Below a picture of the remote control whose design can be different depending on the model.
commands
Most of the buttons on the remote replication the keys on the DVR keyboard. There are also the following
additional functions:
1 - Play / Paua (
1 - Play / Paua (
)
To search for movies, play, and pause
2 - Stop ()
Stop playback
2 - Stop ()
Stop playback
3/4/5/11 - Moving
- Motion arrows in all directions
3/4/5/11 - Moving
- Motion arrows in all directions
6
-
Menu / ESC
- Press to open the programming menu and to exit
6
-
Menu / ESC
- Press to open the programming menu and to exit
6
-
Menu / ESC
- Press to open the programming menu and to exit
6
-
Menu / ESC
- Press to open the programming menu and to exit
