USER MANUAL
DIGITAL VIDEO DR-N4 / 8/16
Page: -
37 -
Page: -
37 -
Page: -
37 -
DSE srl - ITALY - WWW.DSE.EU
CAMERA CH
• Select the channel to apply the video settings, you can select one channel at a time or the ALL
CAMERA CH
• Select the channel to apply the video settings, you can select one channel at a time or the ALL
CAMERA CH
• Select the channel to apply the video settings, you can select one channel at a time or the ALL
option that configures all channels in the same way.
PTZ PROTOCOL
• Sets the PTZ protocol to be used for controlling the speed dome cameras installed. Among the
PTZ PROTOCOL
• Sets the PTZ protocol to be used for controlling the speed dome cameras installed. Among the
PTZ PROTOCOL
• Sets the PTZ protocol to be used for controlling the speed dome cameras installed. Among the
protocols are PELCO D for use with SD series speed dome cameras and protocols of the main PHILIP builders,
PANASONIC, SAMSUNG, VTS, Yaan, YBOER, SYYT, VIDO, TIANDY, JY2000, TD500, CLT-618
PTZ BAUD RATE
• Sets the speed of the Protocol (from 1200 to 9600)
PTZ BAUD RATE
• Sets the speed of the Protocol (from 1200 to 9600)
PTZ BAUD RATE
• Sets the speed of the Protocol (from 1200 to 9600)
PTZ ID
• Sets the speed of the dome camera ID (0 to 255) Before configuring the command of the speed dome in
PTZ ID
• Sets the speed of the dome camera ID (0 to 255) Before configuring the command of the speed dome in
PTZ ID
• Sets the speed of the dome camera ID (0 to 255) Before configuring the command of the speed dome in
the DVR verify the settings of the camera carefully (protocol, speed, address) in order to set them consistently in
the DVR, otherwise the camera will not respond to commands.
CONFIGURATION COLORS
• click
CONFIGURATION COLORS
• click
CONFIGURATION COLORS
• click
to set the values of
GLOSS / CONTRAST / HUE / SATURATION (1 to 16). To exit the settings, click ESC or right-click
MOTION DETECTION
• in this section the user sets the sensitivity and the area on which to enable logging in
MOTION DETECTION
• in this section the user sets the sensitivity and the area on which to enable logging in
MOTION DETECTION
• in this section the user sets the sensitivity and the area on which to enable logging in
MOTION DETECTION. For recording MOTION DETECTION we intend to start recording only when the system
detects movement or a change in the image. The first thing to do is to set the sensitivity (disable, higher
sensitivity, normal sensitivity, low sensitivity), made this click
to set the area on which
enable DETECTION MOVEMENT (AREA) and the enable period of the motion detection.
Click MOTION DETECTION ZONE. the monitor is subdivided into many small squares that form a real grid, if the
background is the BLUE MOTION is active, when in fact the background is transparent the MOTION DETECTION
is not active. To define the detection area select the grid square with the navigation arrows and press
or ENTER to change the
or ENTER to change the
riqudro status.
The selection of masks is done very comfortably with the mouse by dragging the arrow while pressing the left
button.
Once you completed the selection of the detection mask click with the right mouse button or press the ESC key to
exit.
