DSC PC5020 Power864 Скачать руководство пользователя страница 68

Страница: 68 / 68

PC5020 Module Compatibility

Module

Compatible?

Comments

Classic Escort (VPM-1)

DLM-1

DLM-4 v1.x

DLM-4 v1.0L

Yes

DLM-7

Escort5580 v3.0

Yes

Fully compatible with Power864.

LCD5500 v1.X

Yes

No Keypad zone support. Some display messages not supported. Can
only be used on Partition 1 and Partition 2, and the first 32 zones.

LCD5500Z v2.X

Yes

Can only be used on Partition 1 and Partition 2, and the first 32 zones.

LCD5501Z v1.x

Yes

Can only be used on Partition 1 and Partition 2, and the first 32 zones.

LCD5500Z v3.X

Yes

Fully compatible with Power864.

LCD5501Z v2.x

Yes

Fully compatible with Power864.

LCD5501Z32-433

Yes

Fully compatible with Power864.

LCD600

LED615

Links1000 v3.0

Yes

Links2150 v1.3W

Yes

Some events not supported (reporting zones 33-64 and partions 3-8).

Links2450 v1.3

Yes

Some events not supported (reporting zones 33-64 and partions 3-8).

PC-16 Out

PC5100

Yes

Can only add addressable devices to the first 32 zones.

PC5108 v1.X

Yes

Can only support the first 32 zones. Enrolls as two expander modules -
each module will use up two supervisory slots.

PC5108L

Yes

Can only be assigned zones from 9 to 32. Will not support zones 33 to
64. Camera scripts can only be run for zones 9 to 32. Enrolls as two
expander modules and uses two supervisory slots.

PC5108 v2.x

Yes

Fully compatible with Power864.

PC5132 v1.X

Yes

No support for Wireless Keys, Pendants or Handheld Keypads. Only the
first 32 zones can be used as wireless zones.

PC5132 v2.X

Yes

No identified Wireless Keys support. Only the first 32 zones can be
used as wireless zones.

PC5132 v3.X

Yes

Only the first 32 zones can be used as wireless zones.

PC5200

Yes

Fully compatible with Power864.

PC5204

Yes

Fully compatible with Power864.

PC5208

Yes

Fully compatible with Power864.

PC5320

Yes

Fully compatible with Power864.

PC5400 Printer/DVACS
Module v1.X to v2.1

Yes

Some printing messages not supported. Some events not supported.

PC5400 Printer/DVACS
Module v2.2

Yes

Some events not supported.

PC55XX

Yes

No Keypad zone support. Can only be used on Partition 1 and Partition
2, and the first 8, 16, or 32 zones.

PC55XXZ

Yes

Can only be used on Partition 1 and Partition 2, and the first 8, 16, or
32 zones.

PC5506

PC5509

PC5700 v1.X

Yes

Enrolls as two expander modules - each module will use up two super-
visory slots.

PC5700 v2.0

Yes

Fully compatible with Power864.

PC5720

Yes

Enrolls as two expander modules - each module will use up two super-
visory slots.

PC5908

PC5928

PC5936

Yes

Fully compatible with Power864.

Skyroute v2.2

Yes

Some events not supported (reporting zones 33-64 and partitions 3-8).

SL-XX

T-Link Yes For UL Grade AA / ULC Level 3

www.dsc.com

Technical Support: 1-800-387-3630
Printed in Canada 29005907 R004

Direct all comments concerning this
publication to

[email protected]

Содержание PC5020 Power864





































































Результаты поиска

Содержание PC5020 Power864

Отзывы:

Похожие инструкции для PC5020 Power864

Бренды по названию

Популярные бренды

DSC PC5020 Power864, Руководство по установке

Результаты поиска

Содержание PC5020 Power864

Отзывы:

Похожие инструкции для PC5020 Power864

Бренды по названию

Популярные бренды