[2] SMS Notification Tamper/Restore
Default (ON)
[3] SMS Notification Opening/Closing
Default (ON)
[4] SMS Notification System Maintenance
Default (ON)
[5] SMS Notification System Test
Default (ON)
[6] SMS Notification Internal Events
Default (ON)
[7] SMS Notification Enabled
Default (ON)
[8] SMS Command and Control Enabled
Default (ON)
[375]-[406] SMS Phone Number 1-32 Partition Option
Default (00)
01-32 assigns the phone number to a partition. 01 signifies partition 1 and 32 signifies partition 32.
FF disables partition assigning for the phone number.
00 is for global partitioning. The phone number will receive notifications from all partitions.
[420] Serial Port Baud Rate (for use with 'R' models only)
Default(05)
Valid entries are 01 - 05:
01 = 9600 Baud
02 = 19200 Baud
03 = 38400 Baud
04 = 57600 Baud
05 = 115200 Baud
[421] Serial Port Settings (for use with 'R' models only)
[1] Parity Enabled
Default (OFF)
ON:
Parity
OFF:
No Parity
[2] Parity Type
Default (OFF)
ON:
Odd Parity
OFF:
Even Parity
[3] Stop Bits
Default (OFF)
ON:
Two Stop Bits
OFF:
One Stop Bits
[4] Flow Control
Default (OFF)
ON:
Flow Control
OFF:
No Flow Control
[5] - [8] Reserved
[422] Integration Identification Number
Default (MAC/IMEI)
This section will display the unique 12- digit number assigned to this communicator for the identification
when integrated with third party applications.
[423]Session 1 Integration Access Code
Default (12345678) Valid Range is 00000000 - FFFFFFFF
This section is a programmable 8-digit number used for initialization with third party applications.
[424] Session 1 SMS Label
Default (11111111)
This section is used to validate the Neo Go mobile application. Program this section with the label Neo Go
when using the mobile application with session 1.
[425] Session 1 Integration Toggle Options 2
This toggle options in this section are used to enable and configure the path used for integration with third
party applications.
[1] Integration Over Serial Port
Default (ON)
[2] Integration Over Cellular
Default (OFF)
[3] Integration Over Ethernet
Default (OFF)
[4] Reserved
[5] Integration Protocol
Default (ON)
[6] Interactive Protocol SMA
Default (OFF)
[7] Reserved
[8] Interactive Encryption for SMA
Default (ON)
[426]Session 1 Integration Toggle Options 3
The toggle options in this section are used to determine the polling and notification behavior used for
integration with third party applications.
30
