DryGair Dehumidification Unit Model DG-X
Installation
Ver. 12/2020
19
4.7
Connecting the Utilities
The following procedure describes how to connect the external utilities to the
DryGair dehumidification unit.
4.7.1
Connecting the Water Drain-Pipe
During unit operation, water is condensed and needs to be removed from the
unit. In some environments, depending on the air temperature and humidity,
this may be a large quantity of water.
Note
To prevent water accumulation, the water drain-pipe should be connected
by a plumber to a drainage line leading outside the room or to any other
place the water should be collected (such as a container).
Make sure the unit is leveled.
1.
Connect the prepared drain-pipe to the main drain outlet, as depicted in
the following Figure 4-8.
Drain tube
(supplied with 1.5m/5feet)
Drain outlet
(1/2" BSP)
Figure 4-8. Water drain outlet
2.
Route the drainage to the water collection location.
The water can be used for other purposes, such as hydroponic systems.
4.7.2
Connecting the Unit to the Power Supply
After the unit is installed, connect the supplied electrical plug into the
electricity socket.
1
2
