Drucker Diagnostics QBC STAR, Руководство оператора системы

Страница: 36 / 89

QBC STAR System Operator’s Manual
6000-300-000 4–8
Printing of Results
When the test is complete, the results are automatically displayed and printed.
NOTE
DO NOT OPEN THE INSTRUMENT DOOR UNTIL THE RESULTS ARE
REVIEWED AND PRINTED. Test results are cleared from the display
when the instrument door is opened.
You must manually keep track of the link between the test results and the patient (unless
a keyboard is being used for patient identification). A space is provided on the printout for
writing the patient name or ID number. In addition, the date and time and the analytical QC
status (Pass, Failed) are printed.
The system only prints the actual measured or calculated results, with no interpretations
or normal values. The following hematology results are reported:
Reported Results
Parameter (abbreviation) STD Units SI Units
Hematocrit (Hct) Percentage Percentage
Hemoglobin (Hgb) g/dL mMol/L
Mean Corpuscular Hemoglobin Concentration (MCHC)
g/dL
mMol/L
White Blood Cells (WBC)
10 9 /L 10 9 /L
Granulocytes
10 9 /L, Percentage 10 9 /L, Percentage
Lymphocytes/Monocytes
10 9 /L, Percentage 10 9 /L, Percentage
Platelets (Plt)
10
9
/L 10
9
/L
Any results that are only slightly out of the operating range (specified in Section 2) are rep-
resented on the display with numerical values, and values that are significantly out of range
will be represented by dashes only (as specified in Section 5). On the printout, if numerical
values are not given for a parameter, this indicates that the results are either greater than or
less than the maximum or minimum acceptable values, and the message “Out of Operat-
ing Range” is printed. Calculated values based on out of range readings will result in “No
Report.” If the Analytical quality control verifications fail, an error message is displayed.
6000-300-000 4-8