manualshive.com logo in svg

Drucker Diagnostics QBC STAR, Руководство оператора системы

Поделиться
Скачать
Drucker Diagnostics QBC STAR Скачать руководство пользователя страница 58

QBC STAR System Operator’s Manual

6000-300-000

 7–8

402

Start-up data error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

403

Printer hardware error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Turn off the external printer
4.  Power down the instrument (Ref. page 4-10)
5.  Check that the connector from the External Printer to the back 

of instrument is properly installed (Ref. page 2-5)

6.  Turn the instrument Power on (Ref. page 4-2)
7.  Turn on the power to external printer
8.  If the error persists contact Technical Support

404

Internal printer communication 
error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Pull the printer paper release lever towards the front of unit 

(Ref. page 3-3)

4.  Manually advance the paper using the manual advance wheel 

(Ref. page 3-3)

5.  If the paper advances, push the printer paper release lever to 

lock the paper into place (Ref. page 3-3)

6.  Power down the instrument (Ref. page 4-10)
7.  Turn the instrument Power on (Ref. page 4-2)
8.  If the error persists contact Technical Support

406

Internal printer head high 
temperature error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Pull the printer paper release lever towards the front of unit 

(Ref. page 3-3)

4.  Manually advance the paper using the manual advance wheel 

(Ref. page 3-3)

5.  If the paper advances, push the printer paper release lever to 

lock the paper into place (Ref. page 3-3)

6.  Power down the instrument (Ref. page 4-10)
7.  Turn the instrument Power on (Ref. page 4-2)
8.  If the error persists contact Technical Support

407

Internal printer over/under voltage 
error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Pull the printer paper release lever towards the front of unit 

(Ref. page 3-3)

4.  Manually advance the paper using the manual advance wheel 

(Ref. page 3-3)

5.  If the paper advances, push the printer paper release lever to 

lock the paper into place (Ref. page 3-3)

6.  Power down the instrument (Ref. page 4-10)
7.  Turn the instrument Power on (Ref. page 4-2)
8.  If the error persists contact Technical Support

Содержание QBC STAR


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды