DRUCK & TEMPERATUR Leitenberger LR-Cal LPC 300, Руководство по эксплуатации, Страница: 89 / 116

DRUCK TEMPERATUR & Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • -Info@Leitenberger.de • • www.druck-temperatur.de
GERMANY
DT www. -Cal.net LR
MANUAL
LPC 300 Druckkalibrator
300 Pressure Calibrator LPC
89
Operang mode: CALIBRATION
In the mode the data shown above the dashed dividing line is the same as in the
„ with test item“ mode.
CALIBRATION
MEASURING
a) Current measured value of the reference pressure sensor LPC-S
b) Current measured value of the test item
c) Deviaon between the test item and reference
d) Setpoint of the calibraon
e) Actual value of the calibraon
f) P-01: Test item No. 1;
<01>: Test step No. 1
g) no: Ident number of the test item ID
h) Current value of the output signal of the test item
NOTE:
If the test item is an analogue pressure gauge, the displayed pressure value of the test item can be
entered into the calibrator via numeric keypad (+
). ENTER
P
I/U
switchable
Pressure signal
(test item)
Electrical signal
(test item)
c)
d)
e)
f)
g)
a)
b)
h)