Dru Maestro 60/2 Tall RCH, Руководство по установке

Страница: 55 / 68

9.2 Connection switch contact (Eco Glow)
(if applicable)
Connection (B) is used for the Eco Glow glow lighting (see fig. 9-2 (B)). When the appliance is not made with Eco Glow
glow lighting, this contact can be used for other purposes. It is a potential-free contact and may be loaded to a maximum
of 230V~ 1A (230W).
9.3 Switching/Dimmable power supply (Triac)
(if applicable)
With connection (C), it is possible, for example, to switch the lamps of DRU lux element or a ventilation system (see fig 9-2
(C)). This can be done by means of the provided remote control or DRU Fire App. The App can also be used to dim this
contact. The power supply of this connection may only be loaded with up to 230V~ 0.35A (80 Watt).
9.4 Operation
9.4.1 Remote control
Proceed as follows to make the remote control ready for use:
1
Place two AA type batteries in the battery compartment of the remote control.
2
After placing the batteries, the version number of the software on the remote control is briefly shown on the display.
1
The display of the remote control now shows the message ‘BND’ and the Bluetooth symbol flashes. The remote control is
now ready to be coupled with the appliance. See the user manual if the remote control is not in ‘BND’ mode.
1
Make the appliance free from voltage for a short while by removing the plug from the appliance control unit and placing
it back again.
2
After briefly making the appliance free from voltage, it is possible to couple the remote control with the appliance for 5
minutes.
1
Simultaneously press buttons 'ignition' and 'switch off' for 1 second.
1
When coupling has been successful, the Bluetooth symbol lights up continuously and the current room temperature and
possibility of ignition are shown.
2
All functions of the remote control are explained in the user manual.
9.4.2 DRU Fire App - User
The DRU Fire App is available for both iOS and Android devices. Proceed as follows to couple the App with the appliance:
2
There should always be an active coupling with the remote control before a device with App can be coupled with the
appliance.
1
Download the App and make sure Bluetooth is activated on the device to be coupled.
1
Open the DRU Fire App and follow the steps in the App.
2
For the thermostat function, the App will use the temperature sensor of the remote control. For a correct operation, the
remote control should be within range and in the same room as the appliance.
9.4.3 DRU Fire App – Service
In addition to normal operation options, the App also has a service menu for dealers and service technician, in which the
current status of the fire, the number of burning hours, the total number of error messages and the last 20 error
messages can be read.
For this function you will need an account. For this, please contact DRU Customer Service.
I nst allation manual
5 5