Dru Maestro 60/2 Tall RCH, Руководство по установке

Страница: 42 / 68

I nst allation manual
4 2
8.2 Adjusting the appliance
The appliance must be set up in such a way that it works correctly in combination with the smoke exhaust system. For
this purpose, a restrictor slide may be installed, or the air inlet guide removed or replaced. The conditions for use with
wall and roof terminal are indicated in tables 7-3 to 7-5.
8.2.1 Restrictor slide
The restrictor slide is supplied separately. It is installed as follows (see fig. 8-5):
1
Remove the glass pane from the appliance (see section 8.1.3).
1
Remove the flue gas distribution plate (1).
1
Install the restrictor slide (2). The restrictor slide falls over part of the flue gas pipe hole, do not yet tighten the
self-tapping screws.
3
When fixing, the arrow on the restrictor slide must point backwards.
1
Adjust the position of the restrictor slide by following situations B, C and D (see table 7-4).
The letter of the position on the restrictor slide corresponds with the letter of the situation.
1
Make sure that the point of the triangle, of the correct position, and the centre of the self-tapping screw are exactly
aligned (3).
1
Tighten the two self-tapping screws.
1
Reinstall the flue gas distribution plate (4).
1
Reinstall the glass pane once the correct air inlet guide and wood set have been installed correctly (see section 8.3).
1
3
2
4
38C-2515
8-5