DRS Technologies DRS WatchMaster IP Ultra 3000 9 Hz, Руководство пользователя

Страница: 43 / 64

WatchMaster
®
IP Elite User Manual
29
Figure 29: Camera Functions Menu
Table 9: IP Camera Functions
Camera Functions Description
Camera - Date/Time
NTP Server Settings
NTP time clock can also be over written manually if necessary
in the Camera
–Date/Time menu. Enter date/time, select the
time zone and enable Daylight savings if needed. Confirm by
pressing the Set Date and Time button.
Manual Time Settings
If NTP isn’t desired or is unavailable, date/time can be
manually edited here. Select the time zone and enable
Daylight savings if needed. Confirm by pressing the Set Date
and Time button. NOTE: NTP must be disabled above in order
to save changes.
Video Camera
– Video
Streaming
Enable Multicast
Streaming
Check this box to select multicast streaming. Make sure your
network supports multicasting. Leave the box as unchecked
for unicast streaming. The default is unicast streaming.
H264 Multicast
Streaming IP Address
Enter the multicast streaming address. Valid range for
multicast IP address is between 224.0.0.0 and
239.255.255.255. Typical multicast IP address is 239.x.y.z
H264 Multicast
Streaming Port Enter the multicast streaming port number. Port number can
vary between 1 and 65535. Default value is set to 6000.
H.264 Bitrate
Select the appropriate bit rate for H264 video by using the
slider. The available range is between 64Kbps to 1000Kbps.
This is a common setting for both unicast and multicast.
H.264 Frame rate
Select a frame rate from 10-30. This is a common setting for