WatchMaster
®
IP Elite User Manual
11
4.3
INSTALLATION PROCEDURE
The WatchMaster® IP Elite 3000 Camera can be configured for both Ethernet/IP and Analog. The
WatchMaster® IP Elite camera can be configure for Ethernet/IP only. You will need the following
recommended list of tools (not included) before you can install the IP Camera.
Power source: PoE Switch, 12-24V DC or 24V AC
IP Network
Ethernet Cable (STP Cat5 recommended)
Tripod or Mounting bracket for mounting the IP Camera
A Phillips head #2 screwdriver
2 Open End Wrenches – 1 inch (25mm), OR adjustable wrenches
A 6-inch scale OR ruler
Torque screwdriver set to 10 inch-pounds (Electric or manual)
Torx (hole in the middle) T10 Pin-In Security bit – 3.5 inch (90mm) in Length
Hex Wrench
RJ-45 connecter and
RJ-45 Crimping Tool
Suggested Tools for Analog Video (IP Elite 3000 only):
o
Coax Cable
o
Coax Cable Cutter/Stripper
o
BNC Connector
o
BNC Crimping Tool
Figure 6: Recommended Tool Kit
Figure 7: Recommended Analog
Tools
Содержание DRS WatchMaster IP Ultra 3000 9 Hz
