DRS Technologies DRS WatchMaster IP Ultra 3000 9 Hz, Руководство пользователя

Страница: 24 / 64

WatchMaster
®
IP Elite User Manual
10
WARNING
This product must be connected to a Power Over Ethernet IEEE 802.af
compliant power source
or a UL Listed “Class 2” power supply rated 12-24V
DC or 24V AC minimum 13 W or 0.54 A.
CAUTION
Operating the camera at voltage levels outside the specified range may result
in permanent damage to the unit and void the product warranty.
CAUTION
Failure to follow the proper procedure may cause permanent damage to the
camera and void the product warranty.
WARNING
DEVICE SENSITIVE TO ELECTROSTATIC DISCHARGE
The camera electronics and electronic interfaces are sensitive to electrostatic
discharge. Please follow appropriate ESD procedures when handling the
camera and during installation. For PoE installations, DRS strongly
recommends the use of STP cabling and an earth grounded end point to
ensure proper ESD immunity. For AC or DC powered installations, a
properly earth grounded power source is strongly recommended.
CAUTION
To ensure a proper earth ground (between the DRS camera and a PoE
switch) DRS strongly recommends the use of Shielded Twisted Pair (STP)
cabling. Installations of DRS cameras using a STP cabling and a properly
earth grounded PoE switch are tested to comply with industry immunity
standards for Electro Static Discharge. Any other installation method may
leave the camera at risk and void the warranty.