DRS Technologies DRS WatchMaster IP Ultra 3000 9 Hz, Руководство пользователя

Страница: 31 / 64

WatchMaster
®
IP Elite User Manual
17
Figure 19: Camera mounted to the Axis Bracket
4.8 ACCESS
1.
After installing the WatchMaster™ IP Elite 3000 Camera, you can access the IP Camera to
make configuration changes and view live video using the DRS Web Interface. In order to
make these changes, you can connect to the IP Camera from any PC on your network. The PC
must meet below requirements
2. OS - Microsoft Windows 7 or Windows XP or Windows Vista
3. Browser - Internet Explorer 9.0 or Mozilla Firefox 8.0
4. VLC Media Player Software 1.1.10 or 2.0.0 – can be downloaded from the DRS IP Elite
Camera directly through the DRS Web Interface or from
http://www.videolan.org/vlc/
4.9 CAMERA DISCOVERY AND IP ADDRESS
To connect to the IP camera for the first time and make initial configuration settings, the IP
address must be discovered. It is recommended that the installer have access to the DHCP server
to enable direct lookup of the IP Address corresponding to the MAC address of the camera. The
procedure for this is network specific.
By default, when the IP camera powers on, it attempts to obtain an IP address from a DHCP server
in the network. If the camera cannot obtain an IP address through DHCP within a reasonable time,
it will default to an IP address of 192.168.0.200 and a subnet mask of 255.255.255.0.
In the event that the installer does not have access to the DHCP server, Windows Network tool
can be used to locate the camera. The below instructions can be used for Windows 7 and
Windows XP.
Windows 7 OS: Click on Start, Click on Computer and Click on Network. A list of devices
connected to your network will appear as below. Double Click on the name (DRS WM IP Elite) of
the camera to launch the default browser. You can see the IP address of the camera in the Browser
URL.