4
4. TECHNICAL CHARACTERISTICS
GENERAL TECHNICAL CHARACTERISTICS
Pumping system
With single acting pumping systems with cam
drive
Drive assembly
DC motor with reducer
Motor power-supply voltage
12V DC
24V DC
Net weight
standard version
3 Kg (6.6 lb)
Max. number of outlets/pumping elements
12 – 24 – 36
Delivery connection (pumping element outlet)
Push-in Ø4mm (5/32in)
Nominal flow rate for single pumping element *
0.02cc/stroke
– RED
(1 notch)
0.03 cc/stroke
– GREEN
(2 notches)
0.04 cc/stroke
– YELLOW
(3 notches)
0.08 cc/stroke
– BLUE
(4 notches)
0.10 cc/stroke
– GREY (5 notches)
0.13 cc/stroke
– BLACK
(6 notches)
Rotation speed (cycle)
3 RPM
Maximum reachable pressure
on the outlet of the pumping element
80bar** (1,160psi)
Reservoir capacity
2 litres (0.53 gallons)
Grease consistency
NLGI00 ÷ NLGI2
Protection degree
IP 69
Temperature of use
-10°C ÷ +60°C (14°F ÷ 140°F)
Storage temperature
-20°C ÷ +80°C (-4°F ÷ 176°F)
Max. relative humidity without operating condensation
90%
Sound pressure level
< 70 db (A)
Electrical connection terminal
1.5mm² max.
ATTENTION
:
Do not power the machine with voltage different than what is indicated on the label.
* NOTE:
The flow rate indicated refers to the following test conditions: grease with NLGI class 00; ambient
temperature 20° C (68° F); ambient pressure 1 bar (14.5 psi); back pressure of 5 bar (72.5 psi).
** NOTE:
The date refers to the maximum operating pressure of the single pumping element. The maximum
pressure supplied by the pump depends on several variables (number of pumping elements used, type
of grease, operating temperature, see Section 7).
