DRONE ART 88025RC, Руководство по эксплуатации, Страница: 9 / 28

Charging And Installing Battery | 9
8. Charging and installing battery
Warning! For your own safety, remove the flight battery whenever you
are asked to do so.
The charger only allows charging 1 battery at one time.
8.1 Charging
■
Use the supplied Xtreme V2 battery charger (89155RC) to charge the batteries. Read
the charger’s operating instructions before using it.
LED indicator
Charging port for
Flight battery
(with push cover)
Charging port for
Transmitter
battery
2S / 3S
selection
■
Flight and transmitter batteries are provided.
Battery for Xtreme V2
(Flight battery)
Battery for transmitter
■
Fully charge the flight battery before you fly and the transmitter battery when necessary.
1. Connect the charger’s USB wire to a suitable power source (input current min. 4.5 A).
Two LED indicators on the charger light up (2 LEDs means 2S).
2. The default charging mode is set for 2S batteries. If you wish to charge a 3S flight
battery (sold separately), press the 2S/3S button on the charger to toggle between
2S/3S charging modes.
3. Charge the batteries as illustrated below:
Flight battery Transmitter battery
4. Observe the indicator lights on the charger while charging:
2S mode (default) 3S mode
Charging
Solid red Solid red
Fully Charged /
without battery
Solid blue
Solid blue