DriveTest BIA-1 BT, Руководство пользователя

Страница: 37 / 46

Pinch Force Meter BIA-1 BT
Version 1.1 Seite 37 von 46
Figure 9: Device positioning
11.4.2 Start measuring
The measurement is started by a short button press. Alternatively, it can be
started through the software (either PC or Android device). During the
measurement the LED shows a yellow light and the measured values are
displayed in the software.
Figure 10: Device during measurement
Permanently yellow

Device is measuring
The device will perform a taring action after initiating the measurement. This
will take about 0.5 seconds. If there is a force applied to the measuring device
during this period, then the following values will be decreased by this value.
The measurement will be stopped automatically if the measuring values will
be below the defined force value for a certain time period. If the measurement