DriveTest BIA-1 BT, Руководство пользователя

Страница: 36 / 46

Pinch Force Meter BIA-1 BT
Version 1.1 Seite 36 von 46
11.3.2 USB connection
Connect the measuring device at the USB socket with the USB cable and
connect the other side of the cable with your PC. The software PinchPilot from
Drive Test has to be installed on your PC. The software is stored on the USB
stick which is part of the set. Start the software PinchPilot and open the
measurement window via “Sensor”

“Measurement” or “Ctrl + M” for
measuring.
Figure 8: Measurement window in software PinchPilot
The LED will show a permanently blue light after connecting to the device.
11.4 Measuring
The measuring device has to be turned on and connected via Bluetooth or
USB to perform a measurement.
11.4.1 Device positioning
The instrument is to be used such that the static part is connected to the stop
of the closing system and the movable part faces towards the moving edge. In
case of two moving edges, choose one of the edges for the static part and
follow the movement of this edge manually.