DriveTest BIA-1 BT, Руководство пользователя

Страница: 38 / 46

Pinch Force Meter BIA-1 BT
Version 1.1 Seite 38 von 46
should be stopped earlier then it can be done manually by pushing the stop
button either on the measuring device or in the software.
The LED will show a permanently blue light after stopping the measurement.
11.5 Turning Off
Pushing the button on the measuring device for a time period longer than 3
seconds will turn the device off. Alternatively, the device can be turned off by
the Android App (see chapter 4.1 “Funktionsübersicht Android App”).
11.6 Charging
The LED on the measuring device will give feedback about the remaining
battery in certain cases. If the LED is showing a permanently red LED after
turning it on then the device has to be charged.
The remaining battery in percentage will be displayed if you push the battery
icon in the Android App (see chapter 4.1 “Funktionsübersicht Android App”).
Connect the measuring device via the USB socket with the USB cable. Then
connect the other plug with a USB power charger or PC/ Laptop.
The LED is slowly flashing in red colour when the device is charging. The LED
turns to permanently green when the battery is fully charged.
Figure 11: LED battery state
Flashing red

Device is charging
Permanently red

Please charge device