Drive DeVilbiss Healthcare Theia, Инструкция по эксплуатации

Страница: 21 / 30

21
11. DISPOSAL
• Check the control unit housing is not cracked or damaged, if damaged the
control unit must be removed from operation immediately.
• Check that the mains cable and plug are in good condition, if either is
damaged it must be replaced with a complete assembly, the plug must
never be re-wired.
• Check that all markings are legible and in sufficiently good condition – if
not replace parts and/or adhesive labels as required
For more detailed service information, spare parts, circuit diagrams etc. please
refer to the service manual. Copies are available from Drive DeVilbiss Healthcare
Ltd. Contact details can be found in section 2.
When the electrical system has come to the end of its useful life, contact
your provider or Drive DeVilbiss Healthcare Ltd. to arrange for collection,
alternatively follow local recycling and disposal policies.
The control unit used with your system is not to be disposed of in general
municipal waste as it is to be considered as Waste Electrical and Electronic
Equipment (WEEE). Some of the electrical components could be harmful to
the environment and where viable the components and materials can be
recovered and recycled. The control unit is to be disposed of following local
WEEE policy or using an approved WEEE recycling service.
Mattress foams can be recycled at recycling centres that offer suitable PU
recycling programs.
The mattress or cushion is unable to be recycled and as such this is to be
disposed of in general municipal waste.
The cardboard packaging that the mattress/cushion system was originally
supplied in is widely recyclable and is to be disposed of following local card
recycling policy.
The polythene bag that the mattress/cushion was supplied in is recommended
to be retained as this can be used to store the mattress/cushion in when it is
not in use.
Warning
The system is to be decontaminated before disposal to avoid risk
of cross contamination.