Drive DeVilbiss Healthcare Theia, Инструкция по эксплуатации

Страница: 14 / 30

14
•
For profiling beds, it is essential that the straps are secured around
the movable sections of the bed frame – Damage will be incurred
when profiled if secured to fixed parts of the frame.
•
To avoid any risk of damage to the mattress ensure there are no
sharp objects which may come in contact with it.
Caution
• Position the control unit by hanging the hooks over the foot board. If there
is no foot board place the unit on the floor with the front facing upwards.
Ensure the rear of the unit is not obstructed by carpet, rugs etc. It is advisable
to place the unit on a firm surface.
• If the system has come from a storage / transport
temperature environment near to the minimum or maximum
values stated allow the cushion/mattress and control unit
to adjust to room temperature for a minimum of 2 hours
prior to plugging into the mains supply - Risk of electrical
system damage if operated outside of the recommended
temperatures.
Caution
• Open all packaging with care.
• Once removed from the packaging check the product for any signs of
damage. If damaged do not put into use and contact your provider or Drive
DeVilbiss Healthcare Ltd. (See Section 2).
• Remove all covers, sheets and the existing mattress/cushion from the bed/
chair.
• Position the mattress on top of the bed frame, top cover facing upwards
and air hose at the foot of the bed for control unit positioning.
• If using a cushion, position the cushion onto a fixed chair which has a padded
seat, with the top cover facing upwards and air hose at a rear corner of the
seat for control unit positioning.
• If using the mattress attach to the bed frame by securing the adjustable
straps to the moving sections of the bed. If using a cushion, loosely secure
the cushion to the chair frame by using the attached securing straps.