Oximeter Series
PULSE OXIMETER INSTRUCTION
MANUAL
6
The operator must be thoroughly familiar with the information
in this manual before using the device.
Unplug the sensor from the oximeter before cleaning or
disinfecting it.
If liquid is accidentally spilled on the unit, clean and dry
thoroughly before reuse.
Do not try to use the SpO
2
and NIBP measurement on the
same arm at the same time. This could potentially affect
measurement accuracy.
At the end of its service life, the equipment, as well as its
accessories, must be disposed of in compliance with the
guidelines regulating the disposal of such products.
Always install or carry the equipment properly to avoid
damage caused by drop, impact, strong vibration or other
mechanical force.
NOTES
Put the equipment in a location where you can easily see the
screen and access the operating controls.
Keep this manual in the vicinity of the equipment so that it can
be obtained conveniently when needed.
The
software
was
developed
in
compliance
with
IEC60601-1-4. The possibility of hazards arising from
software errors is minimized.
SpO
2
measurements may be influenced by high ambient light,
