Oximeter Series
PULSE OXIMETER INSTRUCTION
MANUAL
18
3.3 Connect the sensor
1. Before use, check the pulse oximeter for mechanical damage.
2. Install the alkaline batteries and ensure that the batteries
have sufficient power.
3. Plug the SpO
2
extension cable in the multifunctional
connector on top of the oximeter, as shown in figure 3. Ensure
that the sensor is firmly plugged in.
Fig.3
3.4. Starting or shutting off the oximeter
To start the pulse oximeter,
1. Press and hold the Power button for about 3 seconds. The LED
and alarm indicating lamp flashes, and then goes out. The system
gives a beep and displays the startup screen. The startup screen
displays the version no. of software.
2. The startup screen disappears and the pulse oximeter enters the
