Oximeter Series
PULSE OXIMETER INSTRUCTION
MANUAL
24
5.2
ALARM ACTIVATION
Alarm will be activated on following conditions:
Physiological alarm:
Technical alarm
(error code):
a) Error Definitions
E 1: program memory is damaged.
E 3: Signal strength is too weak to be detected.
E 4: Sensor is unplugged.
E 5: No finger is inserted or sensor goes wrong.
E 6: The oximeter can not search for pulse.
E 7: It takes too long to search pulse.
E 8: Pulse alarm is malfunctioning.
E 9: The SpO
2
value is lower than the low limit
E 10: The SpO
2
value is higher than the high limit
E 11: The value of pulse rate is lower than the low limit
E 12: The value of pulse rate is higher than the high limit
E 13: Power supply is insufficient.
When the E9, E10, E11 or E12 occurs, the value of
parameter will flash.
Check the error code
Press the right arrow key under normal screen, it will
indicate any existing error codes. To return to normal
