manualshive.com logo in svg

Drive DeVilbiss Healthcare 9003, Инструкция по эксплуатации

Поделиться
Скачать
Drive DeVilbiss Healthcare 9003 Скачать руководство пользователя страница 4

1. INTRODUCTION

Thank you for purchasing a Drive DeVilbiss Inspiration Cot. For safety reasons it is 
imperative that the instructions are read and fully understood prior to use, as they 
contain information regarding the safe operation and maintenance of the product.
If you have any questions concerning the operation and maintenance of the cot please 
contact your supplier who will provide you with expert professional advice.
In line with our policy of continuous improvement we welcome any suggestions that 
could lead to product improvement.

2. CONTACT INFORMATION

For any service, warranty, sales or customer service information regarding this product 
please contact your provider or if in doubt contact Drive DeVilbiss Healthcare Ltd. at 
the following address: 
 

For Service & Support outside the United Kingdom & Northern Ireland please contact 
the local distribution company from where this equipment was purchased. Failure to 
do so may result in the manufacturer’s warranty becoming void. 

Service & Maintenance 

Tel: +44 (0)1422 233136 
Fax: +44 (0)1422 233010 

Spares

 

Tel: +44 (0)1422 233136
Fax: +44 (0)1422 233010

[email protected]
www.drivedevilbiss.co.uk

Drive DeVilbiss Healthcare Ltd.  
Heathfield Lane
Birkenshaw
West Yorkshire
BD11 2HW
United Kingdom

Customer Service 

Tel: +44 (0) 845 0600 333 
Fax: +44 (0) 845 0600 334

Please quote the product serial number on all correspondence.

4

Содержание 9003

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды