DRESSTA 32501, Руководство оператора

Страница: 73 / 177

OPERATING
SECTION 4
Page 27
DRESSTA TD-15H
OPERATING MOUNTED EQUIPMENT
4.17.5. TILT
LH TILT
Pull the control lever to the left to lower the left hand corner of the blade. The lever will return to
the hold position when released.
RH TILT
Push the control lever to the right to lower the right hand corner of the blade. The lever will return
to the hold position when released.
4.17.6. RIPPER CONTROL LEVER
NOTE: For proper operation of the ripper control lever and observation of working tool it is
necessary to swivel the operator’s seat 15° to the right.
Fig. 4.24. Ripper Control Lever (2)
1. Blade Control Lever
2. Ripper Control Lever
3. Horn Button I. Ripper Raise
II.
Ripper Lower
III. Hold
1. Ripper Raise
To raise the ripper to the required height, move the lever into position “I”. The control lever will
return automatically to HOLD position “III” when released.
2. Ripper Lower
To lower the ripper moves the lever into position “II”. The control lever will return automatically to
HOLD position “III” when released.
IMPORTANT: Holding the control lever in any position except HOLD for an extended period of
time will produce excessive heat in the hydraulic system which may affect equipment
performance.
https://www.truck-manuals.net/