3.0 LED TROUBLESHOOT
14
R699825 - BEST 3D passive Kit
3.0 LED TROUBLESHOOT
3.1
LED standard functions
3.2
Issues and LED troubleshooting
4.0 MAINTENANCE AND CLEANING
Avoid direct sun light and water contact with the BEST 3D passive Kit. This device must be in a place with good
ventillation. Clean the BEST 3D passive Kit lens periodically, or whenever you notice smudges or too much dust on
the crystal surface.
•
To remove dust or smudges, gently wipe the lens with a dry and soft lens cleaning cloth.
•
To remove stubborn smudges, moisten a lens cleaning cloth with lens cleaner and gently wipe the surface of the
lens.
Red continuous light
The BEST 3D passive Kit is connected to the projector but no synchro
signal is detected.
Green continuous light
2D synchro signal detected.
Green flashing light
3D synchro signal detected.
ISSUE
SOLUTION
LED is not light up
Ensure that the VESA > JACK cable is correctly inserted and that the
projector is not in standby mode.
Red is continuously light
The BEST 3D passive Kit is powered but cannot detect a 3D signal.
Please check that the projector is correctly set to 3D Mode (Frame
Packing, Side by Side or Top and Bottom in the info menu).
Green LED flashes correctly
but no 3D images are visible.
Ensure that the BEST 3D passive Kit is mounted in the correct
direction: the Dreamvision logo on the modulator must be visible. Make
sure that you wear the passive 3D glasses and that your screen is 3D
capable.
Avoid touching the lens surface directly to prevent finger prints or to damage the lens surface.
Avoid absolutely any water or humidity to accumulate into this device, otherwise the lifetime will be greatly
reduced. Make sure that this device is completely dry before lightning up the projector.
