2.0 POSITION AND ALIGNMENT
R699825 - BEST 3D passive Kit
13
2.4
STEP 4: Check the 3D performances
To check the 3D performances of the BEST 3D passive Kit, you can use TEST PATTERN 4b or directly by viewing a
3D program. To use the TEST PATTERN 4b, please follow the steps below:
•
Browse, select and display the TEST PATTERN 4b
•
Go into the projector menu and select the Side-by-Side 3D mode
•
Put the passive 3D glasses on
When closing the right eye, the R-squares should be barely visible.
2.5
STEP 5: Ghosting Black-over-White levels (optional)
The TEST PATTERNS 5a and 5b will reveal the ghosting overlapping black-over-white level. This setting has a
minor performance hit on global 3D performances. Additionally, if the lens flare has been correctly pushed out of the
screen, there should be only a residual clear coloration into the black pattern. You can adjust into the projector menu
the black level and white level to reduce the overlapping coloration.
Make sure when doing this setting that the central steps remain in grey shades.
The overlapping black-over-white may be lightly colored but
the central bar must remain in grey shades to obtain the best 3D performances.
Note that the projector needs to warm up at least 20 min. to obtain a cross-talk free image.
Once STEP 5 is completed, you can set in the projector menu the 3D mode back to “Auto”.
EMPTY AREAS WHEN CLOSING RIGHT EYE
