2.0 POSITION AND ALIGNMENT
8
R699825 - BEST 3D passive Kit
Tighten the 2 screws A when the distance between the modulator and the projector lens is correct.
Then adjust the vertical position to center the light path into the BEST 3D passive Kit as described below.
Tighten the 2 wheels B when the light path is at the center of the modulator.
If the projector uses a large zoom (<2.0 throw ratio distance), the modulator will be fixed nearer to the
projector. If the projector uses a small zoom (>2.0 throw ratio distance), the modulator will be located farther
from the projector.
Correct position
The modulator is too near
The modulator is too far
A
A
B
B
Correct vertical position
