© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
15
UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019
©2019 DreamLine. All Rights Reserved
(L)
Fig 10
Fig 11
Metal File
Out-of-plumb
at the bottom
<Less than 90°
A
Plumb line
Plumb line
**If the wall is out-of-plumb at the
bottom, measure that dimension as
(A) and add it to the length of the
U-channel (+1/4” max):
Finished cut length (L) =
Glass Width + 3/16” + dimension A
U-Channel 1
71”
U-Channel 2
(L)
71”
Installation steps for 24” hinge panel glass and the L-Bar™
10.
Cut the
Vertical U-channel 1 (#09)
to
71”.
(Fig 10)
TIP:
Use a metal file to remove any burrs from the cut end
of the U-channels before placing them onto the glass.
NOTE
The Vertical U-channel for the Hinge Panel glass
will accomodate
up to 1/4” for out-of-plumb.
Do not exceed this amount.
11.
Cut the
Bottom
U-channel 2 (#29)
to
24”
(see note** below). (Fig 11)
