© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
24
UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019
©2019 DreamLine. All Rights Reserved
2
4
Door
1”
1
2
3
4
5
6
7
8
Around Bottom sweep
measure
measure
1
Handle side of door
Fig 23
Fig 22
3
Panel
22.
Measure the bottom of the
Door Glass (#01)
from
side to side to determine the actual width of the door.
Cut the
Bottom Sweep Vinyl (#07)
to the size of your
measurement and notch 3/8” of the inner side of the
Bottom Sweep Vinyl
(#07)
as shown in
Fi
g 22.2
.
Press the
Bottom Sweep Vinyl (#07)
onto the bottom
edge of the
Glass Door (#01)
.
NOTE:
Make sure the
Bottom Sweep Vinyl (#07)
is flush
to the vertical edge of the handle side of the
Door Glass
(#01)
.
(Fig 22)
23.
To install the
Hinge-Side Vinyl Seal (#33),
take three measurements :
• from the top edge of the
Door Glass (#01)
to the top of the center portion of the top
Hinge (#06)
(see
Fig 23.1
for an example to use for taking all three measurements)
• from the bottom of the center portion of the top Hinge to the top of the center portion of the
bottom
Hinge (#05)
• from the bottom of the center portion of the bottom
Hinge (#05)
to the threshold
Cut the
Hinge-Side Vinyl Seal (#33)
according to these measurements. Notch the cut strips to slide
them into the hinges and around the installed
Bottom Sweep Vinyl
(#07)
to cover the space
between both glass panels. Open the door and press the cut strips onto the vertical edge of the
Door Glass (#01)
so they will overlap the panel glass.
(
Fig 23)
