© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Missing Parts
Problem/Symptom
Suggested Solution
page#
Top of the
Return Panel (#26)
is not
flush with the top of the Door Glass
Leakage: beneath the Door,
Bottom
U-Channel (#29)
and/or the
Return
Panel (#26)
• Check all shipping/packaging material for missing
parts/components.
• If not found, contact DreamLine Customer
Support
[1-866-731-2244] to order factory part
replacement.
• Measure that the height of the Door and Return
Panel Glass are at 72 inches (1828.8mm).
• Refer to the Door Glass Manual for proper
installation of the door.
• Inspect that all vinyl seals are properly installed.
• Replace any damaged or missing vinyl seals.
• Inspect the silicone and remove and replace as
necessary.
• Allow 24 hours for the silicone to cure before
using the shower.
Door does not close tight with the
Return panel glass
• Check that the hinges are properly adjusted.
(See Hinge Adjustment procedure in the door glass
or hinge panel glass manual).
• Check that the door and panel glass are properly
aligned and that there is even clearance between
the door and the Return panel.
• Check that all vinyl seals are installed correctly.
21-22
19, 23
25
UNIDOOR PLUS Style L Shower Enclosure Panel Manual Ver 2 012020
©2020 DreamLine® All Rights Reserved
Troubleshooting
Prior to contacting DreamLine® Customer Service, please
have the following information readily available:
- Purchase Order Information
- Name, PO Number, Dealer/Vendor Name, etc.
- SKU/Model Number (see Page 2)
- Factory Part Information (see Page 26)
TIP
