- 82 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
11.1.6 Stab Positioner without USALS (DVB-S)
Use this type of configuration if you want to receive many satellites without a Stab positioner
from a Single Universal LNB. The coax cable is directly connected from you Dreambox to the
LNB.
Please read the section
11.1 DVB-S configuration
to learn how to get into this menu.
The “Satconfig” menu will open up.
Using the
Navigations-Buttons left/right
to select
the “advanced” configuration.
Navigate to the option “Satellite”. Use to the
Navigation-Buttons left
and
right
to select the
desired satellite and.
Navigate to the option “Satellite” and press the
Navigation-Button right.
Use the
up/down-Buttons
to navigate to the
“DiSEqC-Mode” option and use the
left/right-
Buttons
to select “1.2“.
Navigate to the option “Use usals for this sat” and
change the setting to “no” using the
Navigation-
Buttons left
and
right
.
Navigate to the option “Stored position“ and enter
position of the selected satellite which is saved in the
positioner by using the
Numeric Keypad
.
Refer to the instruction manual or your positioner for
the number of the saved position.
