- 78 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
11.1.2 Two satellites via Toneburst A/B (DVB-S)
Use this type of configuration if you want to receive two satellites from one LNB each. It does
not matter if you use one or two dishes to achieve this.
Connect the two coax cables form the two LNBs to a so-called Toneburst switch and connect
the coax cable from the Toneburst switch to your Dreambox.
Please read the section
11.1 DVB-S configuration
to learn how to get into this menu.
The “Satconfig” menu will open up.
Use the
up/down-Buttons
to navigate to the
“DiSEqC-Mode” option and use the
left/right-
Buttons
to select “Toneburst A/B”.
For Port A and Port B select the desired satellites
just as described in the
Single satellite – direct
connection
section.
Make sure you know which satellite is connected to
which input on the Toneburst switch.
If you do not find any services in the transponder
scan later, exchange the two satellites in this list and
try again.
Press the
OK-Button
to save your settings.
