- 62 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
You have the following options:
Teletext - Selection:
Select the "Search" option and press the
OK-Button
to start searching for Teletext information on
other services without having to leave the service that you currently are watching. After the search is
finished you can use the
Navigation-Buttons left
and
right
to select the Teletext of another service
without having to switch services. Press the
OK-Button
to select the desired Teletext. This option is
only available if more than one service on the current satellite transponder actually transmits Teletext
information. If this is not the case you cannot make a selection.
Screen format:
Standard mode 16:9 = on/off
Enabling this shows the TuxText in 16:9 Aspect Ratio. Press the OK-Button to enable or disable this
option. The default setting is disabled.
Text/TV mode 16:9 = on/off
Enabling this, switches the TV to 16:9 Aspect Ratio if the PIG-Mode is activated with the Volume-
down-Button. Press the OK-Button to enable or disable this option. The default setting is disabled.
Note:
On some older 4:3 TV’s these Modes may not work. If enabled, it could happen, that your TV switches
away from the VCR or A/V socket.
If you are using a 4:3 TV, we suggest not to enable these modes.
Brightness:
Here you can adjust the brightness of your Teletext. Press the Navigation-Buttons left or right to adjust
the brightness.
Transparency:
Here you can adjust the transparency value of your Teletext. Press the Navigation-Buttons left or right
to adjust the alpha value.
National characterset:
automatic recognition = on/off
The national codepage detection is used to display the teletextpages with the right letterset for your
location. Press the OK-Button to enable or disable this option. The default setting is enabled. If
disabled, use the Navigation-Buttons left or right, to choose your codepage.
For further information see
www.tuxtxt.net
