http://dreamcatcher.asia/cw
______________________________________________________________________
ME3000 Analog Electronics
Lab 6 - 19/19
Figure B-12 – Cursor Controls
8.
X Cursors
places two cursors on the
X-Axis
of the waveforms to measure the
time
difference
between the two cursors (X2 minus X1).
Delta X
denotes the
time difference
.
9.
Y Cursors
places two cursors on the
Y-Axis
of the waveforms to measure the
voltage
difference
between the two cursors (Y2 minus Y1).
Delta Y
denotes the
voltage difference
.
AutoScale and Run/Stop
1.
AutoScale
automatically configures the oscilloscope to best display the input signal by
analyzing any waveforms connected to the channel and external trigger inputs. If
AutoScale
fails, your current setup will remain unchanged.
2. Click
on the oscilloscope toolbar or via the
Tools
menu once you have obtained
a running signal.
3. The auto scaling may take awhile for the application to analyze and adjust the waveform.
4. Once the auto scaling has completed, you will see a best fit waveform displayed on your
graph.
5. Use the
Run/Stop
button to manually start or stop the oscilloscope acquisition system for
acquiring waveform data.
6. You may click
or
to start or stop acquiring the waveform.
