http://dreamcatcher.asia/cw
______________________________________________________________________
ME3000 Analog Electronics
Lab 6 - 18/19
Figure B-10 – Soft Front Panel of the Delay Control and Trigger Point
13. You may click
or
to increase or decrease the delay time.
14. The oscilloscope offers three types of horizontal mode functions, which are
Main Mode
,
Roll
Mode
, and
XY Mode
. You may select the horizontal mode by clicking the drop-down list
under
Mode
.
Measurement and Cursor Controls
1. The
Measurements & Cursors
button is located on the toolbar of the soft front panel.
2. Click
to activate the automated measurement and cursor system.
This will display the window as shown below:
Figure B-11 – Soft Front Panel of the Measurement and Cursor Controls
3. The oscilloscope provides three types of settings for marker property, which are
Auto
,
Manual
, and
Off
.
4.
Auto
marker automatically places the cursors on the graph based on the selected
measurements.
5.
Manual
marker allows the cursors to be placed manually on the graph for customized
measurements. This will enable the
Cursors
panel.
6.
Off
will disable the graph markers from the graph display.
7. If the
Manual
marker is selected, the
Cursors
control will be enabled. This is shown in Figure
.
