http://dreamcatcher.asia/cw
______________________________________________________________________
ME3000 Analog Electronics
Lab 6 - 13/19
value will double to
10 V
pp
. If you change from
high impedance
to
50
Ω
, the displayed
amplitude value will drop to half.
You cannot specify the output amplitude in dBm if the output termination is currently set to
high impedance
. The units are automatically converted to V
pp
.
You may configure the output termination by clicking
Tools
in the menu bar. Select
Waveform Gen
followed by the
Output Setup
tab; input the desired load impedance value on the
Impedance Load
panel, and select the unit from the drop down list; or select
High Z
for high impedance load.
