2
INSTRUCTIONS FOR USE
Package Contents:
Insta-Feed™ Bottle Warmer
Quick Reference Guide
2x Storage Caps
WARNING:
Read the ENTIRE instruction manual to become familiar with the features
of the product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury. Failure to operate this
product in a safe and responsible manner could result in injury or damage to the product
or other property. This product is not intended for use by children. Do not attempt
disassembly or use with incompatible components. This manual contains instructions for
safety, operation and maintenance.
IMPORTANT SAFEGUARDS
READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WHEN USING ELECTRICAL APPLIANCES, PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE
THE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING:
• DO NOT IMMERSE IN WATER.
• HOUSEHOLD USE ONLY.
• Do not touch hot surfaces.
• DO NOT open Sterilizing Lid or reach over the appliance while in use, as steam
will cause burns and serious injuries. Do not touch lid or interior parts during
use, as serious injury may occur.
• Always remove the Sterilizing Lid carefully by the handle. Take care when
removing the Sterilizing Lid as there may be some residual steam—keep hands
and face away. Allow the steam to clear before reaching into the unit. Always
retrieve the sterilized parts by removing the Lift-Out Basket.
• To protect against electrical shock, do not immerse cord or plug in water or other liquids.
• Close supervision is necessary when any appliance is used near children.
• This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts.
• Always unplug the warmer before filling. Do not use Sterilizing Lid for warming.
• Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
• Misuse of the product may cause potential injury.
• The heating element surface is subject to residual heat after use.
• The use of accessory attachments not recommended by Handi-Craft Company and
may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Do not place on or near a hot gas or electric burner or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot liquids.
• To operate, plug cord into wall outlet. To disconnect, turn any control to “off,” then
remove plug from wall outlet.
• Always add water and then press Power Button. If the Power Button is pressed first,
steam may form when water is added.
• Never freeze glass containers, as glass may break.
• Do not use this warmer for frozen milk or food. Always thaw frozen milk or food overnight
in the refrigerator first before warming.
EN
Specifications:
Nominal voltage: 120VAC/60Hz 500W
• Do not use appliance for other than intended use.
• Never immerse the warmer or power cord in water.
• When in use, the warmer contains hot water. Be careful to avoid spilling or splashing
any water on yourself when removing contents from the warmer.
• Before serving, be sure food is at a safe temperature.
• Warming food for long periods is not recommended.
• Food should not be heated for too long
• Before feeding, always check the content temperature of the bottle or the small jar.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to fit into a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
• Before servicing, unplug cord from wall outlet. Do not leave cord within child’s reach.
• The preheating of the appliance is not necessary.
• A short power-supply cord is provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
• Do not use an extension cord.
• Children shall not play with the appliance.
• Any maintenance servicing should be performed by an authorized service representative.
• NOT FOR SPACE HEATING PURPOSES.
SAVE THESE INSTRUCTIONS
PARTS OF THE INSTA-FEED™
BOTTLE WARMER:
1. Warming Chamber
2. Indicator Light
3. Power Button
4. Sterilizing Lid
5. Adapter Ring
6. Measuring Cup
7. Lift-Out Basket
8. Storage Caps
6
7
4
5
8
1
2
3
WARMING BOTTLES AND FOOD JARS
CAUTION: Always unplug the warmer before filling.
Do not use Sterilizing Lid for warming.
1. Remove the Measuring Cup from the rear of the warmer.
2. Add DISTILLED water to the Measuring Cup, following
the Warming Guide on page 5 to determine the
amount of water to add based on your bottle type.
Note: These amounts are a guide only. There are many
variables that can impact the final temperature of the
bottle or food jar you are warming, such as starting
temperature, size, and shape. Always test the temperature
before feeding your baby.
3. Pour the DISTILLED water from the Measuring Cup directly into the Warming
Chamber. Do not overfill, as overfilling may cause the bottle/food jar to be overheated
or may cause damage to the unit.
USE DISTILLED
WATER ONLY!
Tap water and bottled
water contain minerals
that shorten the life of this
appliance. Damage from
use of non-distilled water
will void the warranty.
