-
13
-
4.3
INSTALLING AIR INTAKE/EXHAUST
Since AQUA HP absorbs heat during operation, it is good to route cooled air (intake/exhaust)
to unheated spaces. The appliance will cool the room in which it is
located and if it is installed
in heated rooms, cooled air should be routed to other rooms or outside.
4.3.1
Installation without air piping
The
AQUA HP
appliance should be installed in a location that is
not too heated and can be used
for dehumidification and cooling these areas (e.g. laundry rooms, basements, etc.). The distance between
the top of the unit and the ceiling should not be less than 600 mm.
I
f the distance between the unit
and the ceiling is less than 600 mm, it is necessary to install two elbows, as shown in the figure.
