Draytek Vigor2910 Series, Руководство пользователя

Страница: 137 / 269

Vigor2910 Series User’s Guide 127
IPSec Security Method This group of fields is a must for IPSec Tunnels and L2TP
with IPSec Policy.
Medium Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High (ESP-Encapsulating Security Payload)- means
payload (data) will be encrypted and authenticated. Select
from below:
DES without Authentication -Use DES encryption algorithm
and not apply any authentication scheme.
DES with Authentication- Use DES encryption algorithm and
apply MD5 or SHA-1 authentication algorithm.
3DES without Authentication -Use triple DES encryption
algorithm and not apply any authentication scheme.
3DES with Authentication- Use triple DES encryption
algorithm and apply MD5 or SHA-1 authentication algorithm.
AES without Authentication -Use AES encryption algorithm
and not apply any authentication scheme.
AES with Authentication- Use AES encryption algorithm and
apply MD5 or SHA-1 authentication algorithm.
Advanced Specify mode, proposal and key life of each IKE phase,
Gateway etc.
The window of advance setup is shown as below:
IKE phase 1 mode - Select from Main mode and Aggressive
mode. The ultimate outcome is to exchange security proposals
to create a protected secure channel.
Main mode is more
secure than Aggressive mode since more exchanges are done
in a secure channel to set up the IPSec session. However, the
Aggressive mode is faster. The default value in Vigor router is
Main mode.
IKE phase 1 proposal- To propose the local available
authentication schemes and encryption algorithms to the VPN
peers, and get its feedback to find a match. Two combinations
are available for
Aggressive mode and thirty for Main mode.
We suggest you select the combination that covers the most
schemes. Below shows the available proposals: