Draytek Vigor2132 Series Скачать руководство пользователя страница 32

Страница: 32 / 431

Vigor2132 Series User’s Guide

Item Description

WAN Status

Enable – Yes

in red means such interface is available but

not enabled.

Yes

in green means such interface is enabled.

Line

– Displays the physical connection (Ethernet, or USB)

of this interface.

Name

– Display the name of the router.

Mode

- Displays the type of WAN connection (e.g.,

PPPoE).

Up Time

- Displays the total uptime of the interface.

- Displays the IP address of the WAN interface.

GW IP

- Displays the IP address of the default gateway.

TX Packets

- Displays the total transmitted packets at the

WAN interface.

TX Rate

- Displays the speed of transmitted octets at the

WAN interface.

RX Packets

- Displays the total number of received packets

at the WAN interface.

RX Rate

- Displays the speed of received octets at the

WAN interface.

Detailed explanation (for IPv6) is shown below:

Item Description

LAN Status

IP Address

- Displays the IPv6 address of the LAN

interface..

TX Packets

-Displays the total transmitted packets at the

LAN interface.

RX Packets

-Displays the total received packets at the LAN

interface.

TX Bytes

- Displays the speed of transmitted octets at the

LAN interface.

RX Bytes

- Displays the speed of received octets at the

LAN interface.

WAN IPv6 Status

Enable – No

in red means such interface is available but

not enabled.

Yes

in green means such interface is enabled.

No in red means such interface is not available.

Mode

- Displays the type of WAN connection (e.g., TSPC).

Up Time

- Displays the total uptime of the interface.

- Displays the IP address of the WAN interface.

Gateway IP

- Displays the IP address of the default

gateway.

Note:

The words in green mean that the WAN connection of that interface is ready for

accessing Internet; the words in red mean that the WAN connection of that interface is not
ready for accessing Internet.

Содержание Vigor2132 Series
















































































































































































































































































































































































































































Результаты поиска

Содержание Vigor2132 Series

Отзывы:

Бренды по названию

Популярные бренды

Draytek Vigor2132 Series, Руководство пользователя

Результаты поиска

Содержание Vigor2132 Series

Отзывы:

Бренды по названию

Популярные бренды