1 8
DRAWMER
8
SPEAKER CALIBRATION TRIM CONTROLS
On the underside of the MC7.1 there are eleven rotary controls that allow the
individual speaker level calibration of your system. Each speaker output has a
control, separated into three sections: the
Surround (Spkr 1)
,
Stereo (Spkr2)
and
Mono/Sub (Spkr 3)
, and correspond to the outputs found on the rear panel. To alter
the speaker level use a small screwdriver to turn - counter-clockwise turns the
speaker level down, and clockwise up.
For the calibration process see the “Monitor Calibration” section of this manual.
Once the system has been calibrated these trims should not be touched.
