8
DRAWMER
AUDIO CONNECTIONS
• Interference:
If the unit is to be used where it maybe
exposed to high levels of disturbance such
as found close to a TV or radio transmitter,
we advise that the unit is operated in a
balanced configuration. The screens of the
signal cables should be connected to the
chassis connection on the XLR connector
as opposed to connecting to pin1. The MC3.1
conforms to the EMC standards.
• Ground Loops:
If ground loop problems are
encountered, never disconnect the
mains earth, but instead, try
disconnecting the signal screen on
one end of each of the cables
connecting the outputs of the MC3.1
to the patchbay. If such measures
are necessary, balanced operation
is recommended.
