Drawell DW-TY-9900, Руководство по эксплуатации

Страница: 10 / 34

9
Fig. 3-3 Schematic diagram of installation of exhaust equipment
Exhaust volume: the size of the exhaust air volume, it is advisable to stick a piece of paper on the
air outlet, which can be gently sucked. If the exhaust air volume is too large, it will affect the
flame stability, and if it is too small, it will not be able to exhaust air. The specific situation
depends on the length, thickness and direction of the exhaust pipe.
Other installation: there are two sockets on the side of the ICP host, one is the control circuit
power port, and the other is the serial port for communication with the computer. The power
port is directly connected to the 220V power socket, and the serial port needs to be connected to
the RS232 interface on the back of the computer host with the provided communication
cable(when there are two RS232 interfaces on the computer, you can use any of them).
After installing the instrument, do not move the position of the instrument at will. Because the
ICP-AES contains precision optical instruments, a large amount of shaking may cause the optical
components of the spectrometer to be misaligned and affect the accuracy of the analysis results.
If the instrument needs to be relocated, please contact the company’s customer service.
Torch installation method(See below)